HIFU Title Figures vs Specification Sections: Why 5.5MHz, 100,000 Shots and 12 Lines Need Careful Reading

HIFU listings on this site carry eye-catching figures in their titles: 5.5MHz on one listing, and 100,000 shots and 12 lines on others. This article explains why those figures must be read differently from specification table values, and what a buyer should ask instead.

Title figures are not table values

A product title is marketing text. A specification table is a structured list of measured or rated values. The HIFU line on this site has no full specification table, so the title figures of 5.5MHz, 100,000 shots and 12 lines are the only numerical figures available for this line — and they are quoted on this site explicitly as title text, not as specification values. That distinction is not pedantry: a title figure has no stated measurement condition, no stated configuration, and no stated scope. A table value, by contrast, sits in a row with a named parameter.

What each title figure would need before it can be compared

For the 5.5MHz figure, a buyer would need to know whether it is a transducer frequency, a rated frequency, or a maximum, and which configuration it applies to. For the 100,000 shots figure, a buyer would need to know what counts as a shot, over what period, and under what settings. For the 12 lines figure, a buyer would need to know what a line means in this system and whether the count is per treatment, per cartridge, or per setting. None of that context is published. Until the supplier provides it, these figures cannot be compared with another supplier's figures, and they cannot be used to rank models.

What is published as company description

Beyond the title figures, the company describes target tissue heating to 65°C as a principle description, and a wound-healing response described by the company as stimulating long-term lifting and tightening within 90–180 days. Both are company principle descriptions, not measured results. The 90–180 day window is a wide range, and a buyer should ask what it refers to — onset, peak, duration, or something else — and what evidence the supplier can provide for it.

The right questions for a HIFU inquiry

• Which title figures apply to the exact model you plan to buy, and what do they measure?
• Is there a specification table for this model, and can the supplier provide it?
• What are the transducer, depth, and probe options, if any?
• What consumables or cartridges does the system use, and what do they cost?
• Which certification documents apply to your model and market?
• What are the price, configuration, lead time, packaging and warranty terms for your order?

No detail page is published for the HIFU line, because no complete specification section is available. Certificates available upon request. Before ordering, confirm price, configuration, lead time and warranty on inquiry.

Related pages

• HIFU machines
• HIFU vs EMS guide

How title figures spread across listings

Title figures often spread across listings for the same product line: one listing carries a frequency figure, another carries a shot count, and a third carries a line count. A buyer reading several listings can easily assemble a composite specification that no single model actually offers — a frequency from one listing, a shot count from another, and a line count from a third. Guard against that by checking, for each figure, which listing carries it and whether that listing describes the model you plan to buy. If two listings describe different models, their figures belong to different models and cannot be combined. If two listings describe the same model with different figures, ask the supplier which figure is current.

What a real specification table would contain

A real specification table for an ultrasound system would list the transducer options, the treatment depths, the energy settings, the shot or line definitions, the cartridge or consumable structure, and the operating limits. None of those are published for the HIFU line on this site. That absence defines the inquiry: ask the supplier for the table itself, not for confirmation of individual title figures. If the supplier provides a table, check it against the title figures and note any discrepancy. If the supplier cannot provide a table, the buyer is choosing on the basis of titles and descriptions, and should weigh that accordingly.

Questions that only the supplier can answer

Every important HIFU question is a supplier question, because no table exists. What the 5.5MHz figure measures, what counts as a shot for the 100,000 figure, and what a line means for the 12 lines figure all need supplier definitions. So do the transducer options, treatment depths, energy settings, cartridge structure, and operating limits. A buyer should ask for the specification table itself, not for confirmation of individual title figures, because a table gives each figure a named parameter and a scope, while a title figure has neither. If the supplier provides a table, check it against the title figures and note any discrepancy in writing.

There is a second trap specific to title figures: composite specifications assembled from several listings. A buyer who reads three listings for one product line can easily combine a frequency from one, a shot count from another, and a line count from a third into a single imaginary model. Guard against that by checking, for each figure, which listing carries it and whether that listing describes the model you plan to buy. If two listings describe different models, their figures belong to different models and cannot be combined. If two listings describe the same model with different figures, ask which figure is current and have the answer confirmed in writing.

Finally, the absence of a table should shape the purchase decision itself. A buyer choosing on titles and descriptions alone is taking a different risk from a buyer choosing on a table. That risk can be managed: by asking for the table, by confirming terms in writing, by agreeing what happens if the delivered machine differs from the description, and by keeping the written record complete. What cannot be managed is pretending that title figures are table values. The distinction between the two is the whole point of careful specification reading, and it applies far beyond this product line.

A note on sources used in this article

Every figure in this article comes from one of two places: a published specification section on this site, or a company description that is marked as such. No figure comes from a third-party listing, a review, or a general knowledge claim about how such machines usually perform. Where a published entry is truncated, this article says so and does not complete it. Where a figure is a company statement, the article marks it as a company statement rather than presenting it as a verified fact. That discipline is what makes the article usable as a buying tool: a buyer can trace every figure back to its source section and can see, at a glance, which figures are table values and which are descriptions. Before relying on any figure in a purchase decision, confirm it with the supplier for the exact model and configuration you plan to buy, and have the confirmation recorded in writing. A figure confirmed in writing for your configuration is evidence; a figure read on a website, without that confirmation, is a starting point for an inquiry.